Your Path to Zero Static With Ecotile ESD Flooring
Protecting microelectronics, sensitive devices and explosives from static discharge is hassle free with Ecotile’s modular ESD flooring solution.
That’s why it’s the trusted choice for 1000s of leading businesses world wide, including Siemens, Toyota and the UK’s Ministry of Defence.
Need to prevent costly static damage to components or eliminate static sparks that could lead to fires in high risk environments? Simply install our ESD floor tiles directly over your existing floor and use them straight away.
They fit together like a jigsaw without any adhesives, making it quick and easy to create or expand static controlled areas. Ecotile is extremely cost effective – if you need to change the layout or relocate, simply lift the tiles and take them with you. That’s a huge advantage over alternative solutions like vinyl and epoxy.
Installation Service
Our professional installation team have decades of experience installing, certifying and testing Ecotile ESD floors.
Modular Solution
Loose lay with a mallet, no adhesives required. Add, remove or replace individual tiles to suit your business requirements.
Logo Tiles Available
Add safety markings with our ESD logo tiles. Clearly label areas that are protected from static discharge.
How Ecotile ESD Tiles Control Static
Stainless-steel microfibres are added to the inner structure of every PVC tile. These microfibres act like conductive veins that draw static electricity through the surface of the floor to the ground.
Ecotile ESD tiles do not wear down or lose their static dissipative properties over time, so you don’t need to worry about static damage from the moment our solution is installed.
A tile with a grounding stud is installed every 60m2 and is connected to an earthing point, allowing static to complete its circuit and flow safely to ground.
Ecotile ESD flooring is installed over a grid of conductive tape laid on the subfloor which unifies conductivity through installed tiles.
Post Installation Testing & Certification
It is critical that your floor meets industry specific standards and falls within the agreed electrical resistance range after it has been installed.
Our tiles have been tested independently against EN 14041:2018
Ecotile Flooring can test your new floor against the standard of your application and provide you with a written certification of compliance for your operational records.
An ongoing test schedule can also be implemented. As per BS EN 61340 Guidebook recommendations, Ecotile can test your floor annually or as frequently as you require for your peace of mind.
Full support and recommendations for after-care are provided, ensuring a suitable floor cleaning routine is implemented.
New to ESD?
Any ESD floor can fail if it’s specified for an incompatible space or does not meet the proper industry-specific ESD standards.
To avoid costly mistakes, ensure you familiarise yourself with the basics of ESD floors.
- ESD floors are part of a system and should be used with other ESD measures i.e. footwear
- Standards vary by industry. Standards for electronics manufacturing and handling differ from those governing telecom, PSAPs, FAA flight towers, and other end-user spaces.
Here’s some helpful ESD Information:
Ecotile ESD tiles have been tested to and meets the following international standards:
BS EN 61340-5-1 Edition 2 2016-05 – Electrostatics. Protection of electronic devices from electrostatic phenomena.
IEC 61340-5-1 Edition 2 2016-05 – Electrostatics. Protection of electronic devices from electrostatic phenomena
Human Body Model (HBM) Testing & EN / IEC 61000-4-2 Edition 2 2016-05 2008.
ANSI/ESD S20.20-2014 & ESD STM97.1-2015
BS EN 1081:2018+A1:2020 – Resilient floor coverings. Determination of the electrical resistance
MOD DSA03. OME Part2 (JSP482) & US MIL-STD-1686
Technical Data
Finish: Smooth
Material: PVC
Resistance: > 3.4 x 104Ω and ≤ 5.0 x 106Ω
Body Voltage: < 100 volts
Dimensions: 497mm x 497mm
Thickness: 7mm
Weight: 8.40kgs/m²
Slip Resistance: R10
Fire Performance: Bfl-S1
Chemical Resistance: Good EN 13529
Note: All figures quoted relate to laboratory testing in accordance with LVS EN IEC 61340-4-5:2018
Benefits
- Suitable for trucks, HGVs and heavy-duty applications
- Install without downtime
- 10 year warranty
- Withstands tight turning circles
- Ideal for uneven or damp floors
- Good chemical resistance
- Expected lifespan of 20 + years
- Exceptionally durable
- Quick & simple to install
- Noise reduction of up to 46db
- No damp proof membrane, screed or adhesives required
- Fire retardant – Class Bfl S1
- Easy to maintain & clean
- Excellent slip-resistance (R10)
- Reduces worker fatigue
- Warm – Insulates the floor from cold
- No additional toxic chemicals, 100% recyclable